Leuchtbox lasers und lampe

SPEKTRALRÖHRE DEUTERIUM- U41815

1003407/3B

Spektralröhren hoher Leuchtdichte zur Emission des Linien- bzw. Bandenspektrums eines Gases oder von Quecksilberdampf. Teilevakuierte, mit Gas oder Quecksilberdampf gefüllte Glasröhren in Kapillarform mit Metallelektroden, an die das zur Energiezufuhr erforderliche elektrische Feld angelegt wird.
Länge der Kapillare: 100 mm
Gesamtlänge: ca. 260 mm

LED LEUCHTE 39W

P0812593/LED

Leistungsstarker RGB LED FLOODI (RF) OUTDOOR Strahler zur
effektvollen, farblichen Beleuchtung von Flächen und Plätzen inklusive
Steuerung und Fernbedienung. Durch den schwenkbaren
Montagebügel sowie der Schutzart IP65 ist der Strahler für die
Außenmontage an Wand, Decke und Boden geeignet. Der elektrische
Anschluss Strahlers erfolgt durch den verbauten Treiber sowie der
Zuleitung inkl. Netzstecker direkt an 230V Netzspannung.

KONDENSOR FÜR SPEKTRALLAMPENGERÄT

1003159/1/3B

LASERMODUL, GRÜN

1003202/3B

Grüner Hochleistungslaser (doppelter Nd:Yag-Laser) mit 532 nm Wellenlänge. Das abgestrahlte grüne Licht der Schutzklasse II ist für optische Demonstrationen ideal geeignet, da es im Maximum der Empfindlichkeit des menschlichen Auges liegt. Es ist ebenso gut sichtbar wie rotes Laserlicht bei einer Leistung von 5 mW. Kompaktes, stabiles Aluminiumgehäuse. Ausgestattet mit einem 10 mm langen Edelstahlstab. Steckernetzgerät im Lieferumfang enthalten.
Laserschutzklasse: II
Leistung: 0,4 - 1 mW bei 20° C
Wellenlänge: 532 nm ± 0,1 nm
Leuchtfleck in 5 m Abstand: <9 mm Ø
Strahldivergenz: <2 mrad
Betriebsspannung: 3 V DC

LAMPENFASSUNG E 27, AUF STIEL -2870.00

F287000

For use with ultraviolet mercury lamp 286000 and mercury lamp with aperture 286500.
Socket with Ø 10 mm post and special 3-pin plug for Control transformer 284050.
Height: 195 mm; cable length: 95 cm.

SPEKTRALRÖRE STICKSTOFF

1003414/3B

Spektralröhren hoher Leuchtdichte zur Emission des Linien- bzw. Bandenspektrums eines Gases oder von Quecksilberdampf. Teilevakuierte, mit Gas oder Quecksilberdampf gefüllte Glasröhren in Kapillarform mit Metallelektroden, an die das zur Energiezufuhr erforderliche elektrische Feld angelegt wird.
Länge der Kapillare: 100 mm
Gesamtlänge: ca. 260 mm

Thermosäule nach Moll - PHYWE - 08479-00

P0847900

Thermosäule zum Nachweis von Wärmestrahlung und Messung des Strahlungsflusses.

Vorteile

Metallzylinder mit poliertem, konischem Reflektor, mit nichtselektiver schwarzer Kohlebeschichtung und 16 Thermoelementen in Reihe geschaltet und 4 mm Anschlussbuchsen.
Mit abnehmbaren Haltestiel.
Inklusive Schutzglasfenster zur Verringerung von Strahlungsverlusten und Kalibrierzertifikat mit Empfindlichkeitsangabe.

Ausstattung und technische Daten

Spektralbereiche:

ohne Fenster: 200 ... 50000 nm
mit Fenster: 300 ... 3000 nm

Ansprechzeit (95%): max. 30 s

Durchmesser Absorberfläche: 12 mm
Öffnungswinkel: 10°
Maximale Strahlungintensität:2000 W/m²
Empfindlichkeit: 20...40 µV/W/m²
Durchmesser/Länge (mm): 34/80
Stiellänge: 170 mm
Stieldurchmesser: 10 mm
Masse: 600 g

EXPERIMENT LAMP - 2800.50

F280050

This lamp emits a bright beam of light, ideal for many types of experiments and demonstrations. Focus and filament position are easily adjusted.
Provided with safety jack connectors and a Ø 10 mm mounting rod for use on an optical bench or with a laboratory stand.
A 50 W halogen lamp is included.
During operation the lamp housing is ventilated by means of a built-in ventilator, so the surface temperature of the housing will not exceed 60 °C.
The Reuter Lamp has a bi-pin socket for halogen lamps 12 V/50 W (item no. 4270.10)
Length: 310 mm. Width: 76 mm. Height: 105 mm (excluding mounting rod).
Power supply needed: 12 V AC/DC, minimum 3 A (35 W lamp) or 4.2 A (50 W lamp).

DIODENLASER, ROT - U22000

1003201/3B

Rote Lichtquelle mit geringer Strahldivergenz in einem kompakten, stabilen Aluminiumgehäuse. Das Gerät baut auf einem Industrielasermodul der Klasse II mit 650 nm Wellenlänge und einer Kollimationslinse aus Glas auf. Ausgestattet mit einem 10 mm langen Edelstahlstab. AC/DC-Netzgerät, 100-230 V, im Lieferumfang enthalten.
Laserschutzklasse: II
Leistung: 0,9 - 1 mW bei 20° C
Wellenlänge: 650 nm ± 5 nm
Leuchtfleck in 5 m Abstand: <8 mm Ø
Strahldivergenz: <1 mrad
Betriebsspannung: 6 - 12 V DC

HANDSPEKTROSKOP - 3210.05

F321005

This high quality instrument gives bright and sharp spectra, centred in the field of view. The instrument is based on a 600 lines per mm grating and allows observation of both emission and absorption spectra. Overall dimensions: Diameter 25 mm, length 105 mm

MODULATABLE HE-NE LASER, CLASS 2

F288550

This laser emits coherent red light with a
wavelength of 632,8 nm.
The optical power of the laser is up to 1 mW. The
light is emitted in a very narrow beam with an
intensity high enough to damage the eyesight if
the eye is hit.
The laser is provided with a mechanical beam
stopper in order to cut off the beam without
turning off the laser tube
Specifications
Operating voltage: 230 V AC ±10 %, 50/60 Hz,
20VA
Fuse: 250 mA, slow blow
Optical power: <1mW
Wavelength: 632.8 nm (red)
Beam divergence (whole angle): 1.8 milliradians
Warm-up period: 20 minutes
Modulation depth: 10-15 %
Input impedance: 1 k©
Operating temperature range: 0°C  40°C
Relative humidity: < 80 %
Dimensions, L x W x H: 460 x 85 x 85 mm
REPLACES F288520 / F288500 EN 112160

STIRLING ENGINE WITH GLASS CYLINDER - 2669.05

F266905

The Stirling engine is a piston engine with glass cylinders. This model uses methylated spirits as a fuel.
Dimensions: 18 x 9 x 9 cm

HE-NE-LASER -U21840

1003165/3B

Monochromatische, kohärente Lichtquelle für optische Experimente z.B. zu Beugung und Interferenz oder zur Rekonstruktion von Hologrammen.

Eloxiertes Metallgehäuse mit Schlüsselschalter, Graufilter zur Abschwächung der Strahlleistung, 2 Haltestiele und Steckernetzgerät. Zur Strahlaufweitung können Mikroskopobjektive (z.B. W30614) auf die Strahlaustrittsöffnung geschraubt werden.

Laserschutzklasse: II
Ausgangsleistung: <0,2 mW (mit Graufilter)
<1 mW (ohne Graufilter)
Wellenlänge: 633 nm
Strahldurchmesser: 0,48 mm
Strahldivergenz: 1,7 mrad
Mode: TEMoo
Polarisation: zufällig
Lebensdauer: > 12000 h
Steckernetzgerät: 12 V DC, 1 A
Abmessungen: ca. 230x55x90 mm³
Masse: ca. 0,8 kg

EXPERIMENTIERLEUCHTE MIT HALOGENLAMPE -U17140

1003038/3B

Lichtquelle mit kleiner Ausdehnung für Optikexperimente. Schwarz lackiertes Metallgehäuse auf Stiel, mit Haltevorrichtung für den vertikalen oder horizontalen Einsatz.
Halogenlampe: 12 V, 50 W
Anschluss: 4-mm-Sicherheitsbuchsen
Lichtaustrittsöffnung: 40 mm Ø
Stieldurchmesser: 10 mm
Abmessungen: ca. 80x80x105 mm

APERTURE HOLDER FOR EXPERIMENT LAMP - 2800.55

F280055

Holder for apertures, colour filters, etc.The aperture holder fits the lens mount of the experiment lamp. It is rotatable and can be used for apertures or filters mounted in standard slide frames.

WHITE SCREEN - 3055.10

F305510

In laminated plastic with white surface.

Height 250 mm.
Width 250 mm.
With 10 mm fixing rod.

ADJUSTABLE SLIT - 3230.00

F323000

Slit length 42 mm, width continuously adjustable to a maximum of approximately 9 mm by means of a spring loaded knurled knob. Made of black coloured brass, placed in a black-anodized aluminium square, 150 mm side length with 10 mm steel rod. The adjustable slit can be positioned vertically or horizontally.

STUDENT REUTER LAMP - 2800.30

F280030

This simple, high intensity light is very suitable for experiments with lenses, prisms and optical gratings. The light source itself is a small festoon lamp with the filament aligned with the supporting rod making it easy to position on an optical bench. The long, narrow filament is ideal for performing experiments with lens optics and gratings. The lamp housing is supplied with a cooling fan which keeps the housing cool enough to touch even though the lamp is rated at 15 watts of electrical power.

LAMP HOUSING F. SPECTRAL LAMP E27 - 2830.65

F283065

This lamp housing for spectral lamps is designed for use with even more spectral lamps using an E27 screw socket. This lamp housing requires a special control transformer, type 2840.50. The lamp holder is equipped with a fan, which ensures that the surface temperature of the lamp housing does not exceed 60 ° C.

SPECTRAL LAMP NA-10 - 2835.00

F283500

A powerful light source for producing line spectra or monochromatic light when used with the appropriate filters.Lamps with 9 pole Pico sockets with external gas glow head for visible spectral emission.Length: 100 mm. Diameter: 20 mm.For mounting inside spectral lamp housing no. 2830.50.

SPECTRAL LAMP CD-10 - 2835.20

F283520

A powerful light source for producing line spectra or monochromatic light when used with the appropriate filters.Lamps with 9 pole Pico sockets with external gas glow head for visible spectral emission.Length: 100 mm. Diameter: 20 mm.For mounting inside spectral lamp housing no. 2830.50.

SPECTRAL LAMP HE-10 - 2835.30

F283530

A powerful light source for producing line spectra or monochromatic light when used with the appropriate filters.Lamps with 9 pole Pico sockets with external gas glow head for visible spectral emission.Length: 100 mm. Diameter: 20 mm.For mounting inside spectral lamp housing no. 2830.50.

SPECTRAL LAMP NE-10 - 2835.40

F283540

A powerful light source for producing line spectra or monochromatic light when used with the appropriate filters.Lamps with 9 pole Pico sockets with external gas glow head for visible spectral emission.Length: 100 mm. Diameter: 20 mm.For mounting inside spectral lamp housing no. 2830.50.

SPECTRAL LAMP ZN-10 - 2835.50

F283550

A powerful light source for producing line spectra or monochromatic light when used with the appropriate filters.Lamps with 9 pole Pico sockets with external gas glow head for visible spectral emission.Length: 100 mm. Diameter: 20 mm.For mounting inside spectral lamp housing no. 2830.50.

SPECTRAL LAMP HG-100 - 2836.10

F283610

A powerful light source for producing line spectra or monochromatic light when used with the appropriate filters.Lamps with 9 pole Pico sockets with external gas glow head for visible spectral emission.Length: 100 mm. Diameter: 20 mm.For mounting inside spectral lamp housing no. 2830.50.

SPECTRAL LAMP, CADMIUM , E27 SOCKET - 2836.55

F283655

A low cost alternative to using the spectral lamps from Osram. These lamps should be used with a special spectral lamp holder (no. 2830.60) as well as a control transformer (no. 2840.50).

SPECTRAL LAMP, MERCURY, E27 SOCKET - 2836.60

F283660

A low cost alternative to using the spectral lamps from Osram. These lamps should be used with a special spectral lamp holder (no. 2830.60) as well as a control transformer (no. 2840.50).

SPECTRAL LAMP, ZINCK, E27 SOCKET - 2836.65

F283665

A low cost alternative to using the spectral lamps from Osram. These lamps should be used with a special spectral lamp holder (no. 2830.60) as well as a control transformer (no. 2840.50).

SPECTRAL LAMP, NEON, E27 SOCKET - 2836.70

F283670

A low cost alternative to using the spectral lamps from Osram. These lamps should be used with a special spectral lamp holder (no. 2830.60) as well as a control transformer (no. 2840.50).

SPECTRAL LAMP, HELIUM, E27 SOCKET - 2836.75

F283675

A low cost alternative to using the spectral lamps from Osram. These lamps should be used with a special spectral lamp holder (no. 2830.60) as well as a control transformer (no. 2840.50).

SPECTRAL TUBE, NE - 2850.00

F285000

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE, HG - 2850.10

F285010

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE, H2 - 2850.20

F285020

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE, H2, BALMER - 2850.25

F285025

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE, HE - 2850.30

F285030

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE, AR - 2850.40

F285040

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE, O2 - 2850.50

F285050

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE, KR - 2850.60

F285060

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE, N2 - 2850.70

F285070

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE, H2O - 2851.10

F285110

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE, CO2 - 2851.20

F285120

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE, XE - 2851.30

F285130

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE, I2 - 2851.50

F285150

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE, NA AND HE - 2851.80

F285180

For observing line and band spectra from various nobel and diatomic gasses. For mounting inside spectral tube holder 2855.50.

Capillary length approx. 70 mm.
Length overall: approx. 220 mm.
Fitted with 6.5 mm contact caps at each end.

SPECTRAL TUBE HOLDER - 2855.50

F285550

This holder makes the use of spectral tubes easier and safer. The spectral tube is mounted from the front in the insulated holders with electrodes, where the lower holder is spring loaded parallel to the tube axis.The holder is provided with a power supply which can deliver 6 kV DC at max. 2 mA to the electrodes built into the base of the insulated holder.Can be used with spectral tubes 2850.00  2851.30 and with many other types of spectral tubes.
Dimensions: 78 x 78 x 290 mm. For 220 V AC.

SPECTROMETER - 3215.30

F321530

This classical sturdy spectrometer can be used with either a prism or an optical grating.

The instrument is provided with an easy to read vernier scale that can be read directly in tenths of a degree.
The spectrometer is supplied with a prism and grating holder on an adjustable prism table.

The collimator and telescope are fitted with 178 mm focal length 32 mm aperture achromatic objectives.
The telescope is fitted with a Ramsden eyepiece and crosshair reticle and a collimator with an adjustable slit.

The telescope and collimator mounting arrangement permits accurate levelling of the axes.
The spectrometer table, diameter 85 mm, is marked with lines to assist positioning of the prism in relation to the levelling screw, and it has interchangeable clamping units for prism and diffraction gratings.

ATI.4470.10

ATI.4470.11

ATI.4470.12

ATI.4470.13