Accord Cadre Segec

770106

NICKEL CHROMIUM WIRE BARE100 M, 0,2 MM DIA. - 50815

50815/CVK

Resistance Wires
Metal wires on bobbins, e.g. for experiments to investigate how resistance depends on the material, cross-sectional area and length of the wire.

TEMPERATURE SENSOR (-18..110°C) - 770104

770104

GLOW LAMP, FESTOON, 70/90 V SET OF 5 PCS. - 53181

53181/CVK

For detecting electrostatic charge and type of charge. Sofitte with neon filling.

Technical data:
Socket: Sofitte
Nominal voltage: 70 V
ignition voltage: 90 V

IRON WIRE BARE 100 M 0,2 MM DIA.- 50801

50801/CVK

Resistance Wires
Metal wires on bobbins, e.g. for experiments to investigate how resistance depends on the material, cross-sectional area and length of the wire.

Students Kit Mechanics 2.0 - 43010

43010/CVK

List of feasible experiments

1. Dynamometer, local gravity factor and weight
2. Hooke's Law
3. Deformations (Additional items: Sand)
4. Resultant of collinear forces/static equilibrium (Additional items: Dynamometer)
5. Translational balance
6. Resulting from concurrent forces (Additional Article: Dynamometer)
7. Modeling static equilibrium situations (Additional Items: Lever arms (ref. 43119), dynamometer)
8. Moment of force, balance of rotation (inter-bearing, inter-motor and inter-resistant levers) 9. Centre of gravity and balance
10. Winch Stepped pulley (additional item: item no. 43131)
11. Simple machines (fixed pulley, movable pulley, hoist)
12. Working on the inclined plane
13. Composition of single machines Stepped pulley (additional item: ref. 43131)
14. Working of a force not parallel to the displacement
15. Potential gravitational energy
16. Elastic potential energy
17. Factors influencing kinetic energy
18. Dynamic and static frictional force
19. Rolling frictional force
20. Braking distance (additional items: Sand, cup, other balls)
21. Deformation in collisions

HOLDER FORBEESPI SPEED METER AND DIGITAL TIMER

770404

Thanks to attaching the BeeSpi V to the retort stand with
BeeSpi V adapter, BeeSpi V can be fixed at any angle and
position in the space above the bench. Leading to shorter total
time needed for experiments from preparation to clean-up

Entire Length:
169mm
Weight: 70g
Diameter of supporting rod: Õ8mm

770118

770102

SUPPLÉMENT POUR LA BEC - 370060

370060/CVK

Iron fine powdered 99,5%,100 g - 91701

91701/CVK

SLOTTED MASS, 10 G, RED

42372/CVK

Steel, painted red. With slot and hole, to match the weight carriers.

PENDULUM BALL,STEEL 25MM DIAM - 43852

43852/CVK

RED Ø4MM SAFETY LEAD (LENGTH 50CM) - REAR STACKING - 30A - 830214

830214

LIGHT SENSOR - 770107

770107

54941/CVK

DEMO-KIT GEOMETRICAL OPTICS,MAGNETIC ADHERING - 47080

47080/CVK

With various models of mirrors, diopters and lenses, optical disc and rectangular bowl. Modelling the reflection and refraction of light, optical instruments, as well as the functioning of the human eye and the correction of defects. For use with the laser light source.

With models of biconvex lens and biconcave lens about 15 cm long (for modeling the functioning of the human eye and the correction of myopia and hyperopia), parallel face block, semi-cylindrical block, prism with right triangle base (45°/90°), plane mirror, convex/concave mirror, optical disc, rectangular cuvette and storage case.

EDDY CURRENT APPARATUS - 54416

54416/CVK

To carry out drop tests in various material combinations between drop bodies and drop tubes with which it can be shown that a strong magnet body is braked very strongly when falling through a tube made of material that is a good conductor of electricity, although the tube material itself has no magnetic properties.
According to Lenz's rule, the braking effect is due to eddy currents induced by the falling magnet in the tube.
Consisting of one plastic and one aluminium tube, falling bodies made of copper, aluminium, brass and magnet material as well as 4 holding clips.
Without stand material.

Technical data

Tube dimensions: 500 x 16 mm Ø

MAGNETIC NEEDLE 75 MM - 49660

49660/CVK

Allows the magnetic poles of a magnet, the magnetic effect of a current, the orientation in the plane of the magnetic field to be revealed. Length 75 mm, requires a spike holder.

STUDENTS KIT ENERGY CONVERSION 2 (FUEL CELL) - 76350

76350/CVK

Fuel cells and solar hydrogen technology are highly topical and will shape our everyday lives in the future. More than 20 interesting experiments from physics and chemistry can be carried out with this equipment set.
A CD-ROM and the four-volume course programme offer a wide range of experiment descriptions with worksheets and technical information on the subject of hydrogen technology and fuel cells.

Technical data

Contents:

PEM fuel cell (0.5 W)
PEM electrolyser for distilled water with graduated gas storage (1 W)
Solar module (0.5 W)
Consumer measuring box with voltmeter and ammeter, light bulb, electric motor and 7 switchable resistors
Stopwatch
Cables, hoses with clamps
Instruction manual and course programme for Sek. I and II physics and chemistry (4 books) and a CD-ROM

STORING CASE FOR DYNAMOMETERS, EMPTY - 41602

41602/CVK

COIL WITH 5 TURNS - 54210

54210/CVK

NEEDLE STAND, SIMPLE - 49702

49702/CVK

CONVECTION TUBE, GLASS FOR LIQUIDS - 48090

48090/CVK

INDICATOR-MOTOR 100 MV - 54595-NO LONGER AVAILABLE

54595/CVK

MASS HANGER, 10 G

42362/CVK

Plate with rod and offset hook, suitable for target weights 42371 to 42378.

DEMONSTRATIONSET SOLARENERGY - 49355

49355/CVK

In about 6 hours, the earth's deserts have absorbed an amount of energy from the sun's rays that would cover the energy needs of the entire human race for a year.
In everyday life, the enormous potential of solar energy is reflected in the increasing use of solar collectors in hot water production.
With the solar collector, the heat exchanger and the circulation pump, the Solar Thermal Conversion Set contains all the important components with which the phenomena surrounding the production of hot water by means of solar radiation can be studied step by step

experiments
1 - Heat radiation
2 - Absorption of heat radiation
3 - Heat flow
4 - Principle of the solar collector
5 - Solar collector with thermosyphon circulation
6 - Solar collector with pump circulation and heat exchanger

AMMETER FOR STUDENTS 50, 500 MA, 5 A - 54956

54956/CVK

MELTING TROUGH - 54220

54220/CVK

Bulb, MES, 1,5 V/0,15 A set of 10 pcs. - 53131

53131/CVK

STUDENTS KIT DYNAMOT

54853/CVK

List of feasible experiments
1. Energy flow and electric current
2. Highlighting the electrical current
3. Energy and current flow in parallel connections
4. Energy flow and voltage
5. Energy flow and voltage in series connections
6. Energy transformation - Thermal energy
7. Energy transformation - Mechanical energy
8. Energy transformation - Chemical energy

PLUG LEAD, 50 CM, RED - 51614

51614/CVK

U-AND I-CORE WITH CLAMPS - 54100

54100/CVK

The cores are riveted together from low-loss dynamo sheets, the contact surfaces are ground flat. With clamping device for fixing the I-core or pole pieces 54341 on the U-core.

Technical data

Height: 170 mm
width: 150 mm
Iron cross-section: 40 x 40 mm
Mass: 6.0 kg

PLUG LEAD, 25 CM, RED - 51613

51613/CVK

DEMONSTRATION CORD 20 M, 1 MM DIAM - 48187

48187/CVK

FLOATING RINGS PAIR - 54418

54418/CVK

Electrode support on plug

23114/CVK

PENDULUM BALL, WOOD,25MM DIAM - 43854

43854/CVK

PENDULUM BALL, WOOD,60MM DIAM - 43861

43861/CVK

DENSITY DETERMINATION BODY SAME MATERIAL, 3 PIECES - 41238

41238/CVK

Same material, different volume, with eyelet.

Technical data

Material: plastic
Dimensions:
height each 1 x 20, 40 and 80 mm
Base area 25 x 25 mm

CROCODILE CLIPS, SET OF (10) - 51095

51095/CVK

Bulb, MES, 6,0 V/0,1 A set of 10 pcs.- 53155

53155/CVK

CONSTANTAN WIRE BARE 100 M, 0,3 MM DIA. - 50811

50811/CVK

Resistance Wires
Metal wires on bobbins, e.g. for experiments to investigate how resistance depends on the material, cross-sectional area and length of the wire.

BODIES FOR DENSITY DETERMINATION, SET OF 3 - 41240

41240/CVK

Same volume, different material, with eyelet.

Technical data
Material: aluminium, iron, plastic
Dimensions: 80 x 25 x 25 mm (50 ccm)

COIL WITH 72 TURNS - 54120

54120/CVK

Copper wire winding on plastic body with square opening, suitable for core 54100. With front plate, on which 4 mm safety sockets and the information on number of turns, load capacity and resistance are located.

Technical data

Taps: 6(2x)/12/24(2x)/72 turns
Load: max. 10 A
Resistance: 0.23 ©
Wire ø: 1.5 mm

Dynamometer, 10 N - 41613

41613/CVK

COIL, MAINS, 600 TURNS - 54115

54115/CVK

SLOTTED MASS, 50 G, RED

42375/CVK

Steel, painted red. With slot and hole, to match the weight carriers.

Heat-radiation source 150 W - 48120

48120/CVK

BUZZER -16820

16820/CVK