HD-Pro HDMI camera
The ‘real-time’ images generated with this ‘stand-alone’ camera provide excellent colour reproduction at high speeds, up to 60 frames per second on any directly connected HDMI screen or monitor. The HD-Pro high definition camera can be used in three modes: as a stand-alone with the built-in mouse-controlled software, in combination with a computer-controlled mode or a combination of both
Connect the HD-Pro directly to a large TV or monitor, take measurements, save images and videos, all without a computer. The menu and controls are displayed on the TV and operated with a mouse connected directly to the camera. More advanced analysis can be done by connecting the HD-Pro to a computer, where ImageFocus Alpha software takes care of being able to make annotations, measurements, ‘stacking’, ‘stitching’ and much more
BUILT-IN SOFTWARE
(displayed on TV, no computer required)
- Storage of images and videos to SD
- Playback images and videos from SD
- Measurements (such as Angle, Line, Horizontal Line, Vertical Line, Rectangle, Circular, Ellipse, Annulus, Two Circulars, Polygon, Curve, etc)
- Compare images
- Grids
- Digital zoom in/out
- Flip
- Pause
- Camera settings (white balance, colour control, etc.)
Supplied with
0.37x objective with C-ring, 30 mm and 30.5 mm adapters for stereo microscopes, 12 V/1 A external power supply, a 32 GB memory card, USB-C Synchronous cable 1.5 m, HDMI cable, USB mouse, 76 x 24 mm calibration plate (1mm/100), cardboard box
TECHNICAL SPECIFICATIONS:
HD 1080p high definition video camera
‘Real time’ images directly on screenStand-alone or via PC or simultaneous use
Built-in mouse-operated software
HDMI, USB-C and SD memory card
C-ring interface
Model available with 13 HD screen (VC.3039-HDS)
Compatible with ImageFocus Alpha software
HDMI 8.0 MP CMOS high-sensitivity sensor
Sensor: SONY CMOS EXMOR 8 MP
Format: 1/2.8", HDTV 1080p (50/60Hz)
Pixels
3840x2160 pixels (capture mode)
1920 x 1080 pixels (live view),
HDMI 60 fps, USB 26 fps
Pixel size: 1.45 x 1.45 µm
Video: 1080p pixels video video mode
HD screen (VC.3039-HDS): 13"
Video output: Digital HDMI, USB-C
Scan mode: Progressive scan, ‘rolling shutter’
Exposure : Automatic/manual 0.04-1000 ms
White balance: Automatic/manual/ ROI
Sensitivity : 300 mV with 1/30s
Noise: 3D Algorithm
Colours: 24 bits
Signal/ Noise (db): 38
Dynamic range (db): 66
Interface : Digital HDMI, USB-C
Storage : High speed 32GB SD memory card (included) (128GB max)
Camera buttons: On/ Off
Mounting : C-ring interface
Power supply : DC 12V/1A Adapter
Operational : -10~ 50 C, 30~80% relative humidity
Software: Works with ImageFocus Alpha software for Windows 10 and above (32 and 64 bit computers), Mac OS and Linux
PC requirements: Equivalent to Intel Core 2, 2.8 GHZ or higher, Memory: 2 GB, USB-C
The ‘real-time’ images generated with this ‘stand-alone’ camera provide excellent colour reproduction at high speeds, up to 60 frames per second on any directly connected HDMI screen or monitor. The HD-Pro high definition camera can be used in three modes: as a stand-alone with the built-in mouse-controlled software, in combination with a computer-controlled mode or a combination of both
Connect the HD-Pro directly to a large TV or monitor, take measurements, save images and videos, all without a computer. The menu and controls are displayed on the TV and operated with a mouse connected directly to the camera. More advanced analysis can be done by connecting the HD-Pro to a computer, where ImageFocus Alpha software takes care of being able to make annotations, measurements, ‘stacking’, ‘stitching’ and much more
BUILT-IN SOFTWARE
(displayed on TV, no computer required)
- Storage of images and videos to SD
- Playback images and videos from SD
- Measurements (such as Angle, Line, Horizontal Line, Vertical Line, Rectangle, Circular, Ellipse, Annulus, Two Circulars, Polygon, Curve, etc)
- Compare images
- Grids
- Digital zoom in/out
- Flip
- Pause
- Camera settings (white balance, colour control, etc.)
Supplied with
0.37x objective with C-ring, 30 mm and 30.5 mm adapters for stereo microscopes, 12 V/1 A external power supply, a 32 GB memory card, USB-C Synchronous cable 1.5 m, HDMI cable, USB mouse, 76 x 24 mm calibration plate (1mm/100), cardboard box
TECHNICAL SPECIFICATIONS:
HD 1080p high definition video camera
‘Real time’ images directly on screenStand-alone or via PC or simultaneous use
Built-in mouse-operated software
HDMI, USB-C and SD memory card
C-ring interface
Model available with 13 HD screen (VC.3039-HDS)
Compatible with ImageFocus Alpha software
HDMI 8.0 MP CMOS high-sensitivity sensor
Sensor: SONY CMOS EXMOR 8 MP
Format: 1/2.8", HDTV 1080p (50/60Hz)
Pixels
3840x2160 pixels (capture mode)
1920 x 1080 pixels (live view),
HDMI 60 fps, USB 26 fps
Pixel size: 1.45 x 1.45 µm
Video: 1080p pixels video video mode
HD screen (VC.3039-HDS): 13"
Video output: Digital HDMI, USB-C
Scan mode: Progressive scan, ‘rolling shutter’
Exposure : Automatic/manual 0.04-1000 ms
White balance: Automatic/manual/ ROI
Sensitivity : 300 mV with 1/30s
Noise: 3D Algorithm
Colours: 24 bits
Signal/ Noise (db): 38
Dynamic range (db): 66
Interface : Digital HDMI, USB-C
Storage : High speed 32GB SD memory card (included) (128GB max)
Camera buttons: On/ Off
Mounting : C-ring interface
Power supply : DC 12V/1A Adapter
Operational : -10~ 50 C, 30~80% relative humidity
Software: Works with ImageFocus Alpha software for Windows 10 and above (32 and 64 bit computers), Mac OS and Linux
PC requirements: Equivalent to Intel Core 2, 2.8 GHZ or higher, Memory: 2 GB, USB-C
Properties
- VC.3039