QUICK-D is a set of modules (H-250mm) and sensors for studying a PLC with touch screen SIEMENS® version (QUICK-D)
- Supplied without power console (optional): requires a single-phase power supply 230V (PUP-AK-M).
- Supplied without frame (optional; requires frame for min. 20 modules SUP-AKR**
EDUCATIONAL OBJECTIVES
• Study of a complete diagram with automation sensors and
components for connecting to the inputs/outputs of a PLC.
• Study the configuration of an Ethernet for computers.
• Study the programming of a PLC in contact language.
• Study the programming of an HMI (Human Machine Interface).
• Study an analogue signal by current and voltage.
Proposed Practical Works
• Creation of the complete wiring diagram of a PLC, an HMI and binary and analogue sensors.
• Creation of the configuration of an Ethernet.
• Creation of a complete PLC program in contact language.
• Creation of a supervision program with control from the HMI.
• Configuration of the PLC with analogue inputs/outputs for 4-20mA
and 0-200mV signal.
QUICK-D version : SIEMENS®
• 1 Siemens® PLC module SIMATEC S7-1200 Ethernet 14I/10O binary with 1 input and 1 output 4-20mA.Optional LOG-STEP programming software.
• 1 Siemens HMI module Simatic KTP600 Ethernet 5.7". Optional LOG-STEP programming software.
Common modules
• 1 Emergency stop module.
• 1 Distribution module of 230VAC on 4mm terminals with RC circuit-breaker 30mA-16A. • 1 Power supply module 230V AC - 24V DC - 2A.
• 1 Pushbutton and switch module.
• 1 Module with limit switch and PT100 temperature sensor.
• 1 Signal generator module 0-10V and 0-200mV.
• 1 Light sensor module.
• 1 Wind sensor module.
• 1 Voltage dimmer module 230V AC with analogue input 4-20mA.
• 1 Module with 2 auxiliary contactors 24V DC.
• 1 Indicator light module 24V DC.
• 3 Bulkhead light modules 230V AC, 40W.
• 1 Set of safety leads for carrying out the different practical works.
- Supplied without power console (optional): requires a single-phase power supply 230V (PUP-AK-M).
- Supplied without frame (optional; requires frame for min. 20 modules SUP-AKR**
EDUCATIONAL OBJECTIVES
• Study of a complete diagram with automation sensors and
components for connecting to the inputs/outputs of a PLC.
• Study the configuration of an Ethernet for computers.
• Study the programming of a PLC in contact language.
• Study the programming of an HMI (Human Machine Interface).
• Study an analogue signal by current and voltage.
Proposed Practical Works
• Creation of the complete wiring diagram of a PLC, an HMI and binary and analogue sensors.
• Creation of the configuration of an Ethernet.
• Creation of a complete PLC program in contact language.
• Creation of a supervision program with control from the HMI.
• Configuration of the PLC with analogue inputs/outputs for 4-20mA
and 0-200mV signal.
QUICK-D version : SIEMENS®
• 1 Siemens® PLC module SIMATEC S7-1200 Ethernet 14I/10O binary with 1 input and 1 output 4-20mA.Optional LOG-STEP programming software.
• 1 Siemens HMI module Simatic KTP600 Ethernet 5.7". Optional LOG-STEP programming software.
Common modules
• 1 Emergency stop module.
• 1 Distribution module of 230VAC on 4mm terminals with RC circuit-breaker 30mA-16A. • 1 Power supply module 230V AC - 24V DC - 2A.
• 1 Pushbutton and switch module.
• 1 Module with limit switch and PT100 temperature sensor.
• 1 Signal generator module 0-10V and 0-200mV.
• 1 Light sensor module.
• 1 Wind sensor module.
• 1 Voltage dimmer module 230V AC with analogue input 4-20mA.
• 1 Module with 2 auxiliary contactors 24V DC.
• 1 Indicator light module 24V DC.
• 3 Bulkhead light modules 230V AC, 40W.
• 1 Set of safety leads for carrying out the different practical works.
Properties
- QUICK-D/ELE