QUICK-C is a set of modules for studying the different types of wiring for starting asynchronous motors.
With frequency converter.
3-phase supply from mains on socket.
The modules are cabled using safety leads Ø4mm.
Compatible with asynchronous motors 400/690V 1500W max.
This equipment requires a 3-phase power console: 3x 400V + Neutral + Earth.
Educational objectives:
- Study of wiring diagrams for starting asynchronous motors.
- Study and operation of direct start-up.
- Study and operation of direct start-up with reversal of the direction of rotation.
- Study and operation of star/delta start-up.
- Configuration of a speed controller with software.
- Study and operation of start-up with speed controller.
- Using a digital wattmeter, ammeter and voltmeter.
Proposed Practical Works:
- Creation of the wiring diagrams of different types of motor start-up.
- Creation of the different wirings of motor start-ups such as direct, direct with reversal of the direction of rotation, star/delta, with speed controller.
- Configuration of the speed controller using the SOMOVE software from Schneider
- Reading of the currents and voltages at the terminals of the asynchronous motor.
- Calculation of the absorbed power.
Composition:
- 1 Module Distribution of three-phase voltage + Neutral 400V-50Hz
- 1 Module Emergency stop
- 1 Module 2 two-pole cut-out devices
- 1 Module Four-pole magneto-thermal circuit-breaker 4A D-curve
- 1 Module Residual current four-pole switch 30mA
- 1 Module Three-pole thermal magnetic circuit-breaker, motor support
- 1 Module Four-pole isolating switch
- 1 Module Transformer 230V/24VAC-50Hz 120VA
- 1 Module Four pushbuttons
- 1 Module 10 indicator lights 24VAC-50Hz
- 1 Module Reversing contactor 24VAC-50Hz with 2NO+2NC
- 2 Modules Contactors 24VAC-50Hz with 2NO+2NC
- 1 Module Timed contactor 24VAC-50Hz
- 1 Module Thermal relay
- 2 Modules Analogue voltmeter (400V) and ammeter (10A) displays.
- 2 Modules Digital wattmeter displays.
- 1 Module Speed controller 1.5kW power supply and 3-phase 400V output.
- 1 set of safety leads for carrying out the different practical works.
OPTIONAL: MOTO-VENTILATOR:
QUICK-C can be completed with a moto-ventilator.
- moto-ventilator of three-phase voltage 400/690V - 300W.
- Nominal speed 1500rot/min.
- ref. KT-1M
With frequency converter.
3-phase supply from mains on socket.
The modules are cabled using safety leads Ø4mm.
Compatible with asynchronous motors 400/690V 1500W max.
This equipment requires a 3-phase power console: 3x 400V + Neutral + Earth.
Educational objectives:
- Study of wiring diagrams for starting asynchronous motors.
- Study and operation of direct start-up.
- Study and operation of direct start-up with reversal of the direction of rotation.
- Study and operation of star/delta start-up.
- Configuration of a speed controller with software.
- Study and operation of start-up with speed controller.
- Using a digital wattmeter, ammeter and voltmeter.
Proposed Practical Works:
- Creation of the wiring diagrams of different types of motor start-up.
- Creation of the different wirings of motor start-ups such as direct, direct with reversal of the direction of rotation, star/delta, with speed controller.
- Configuration of the speed controller using the SOMOVE software from Schneider
- Reading of the currents and voltages at the terminals of the asynchronous motor.
- Calculation of the absorbed power.
Composition:
- 1 Module Distribution of three-phase voltage + Neutral 400V-50Hz
- 1 Module Emergency stop
- 1 Module 2 two-pole cut-out devices
- 1 Module Four-pole magneto-thermal circuit-breaker 4A D-curve
- 1 Module Residual current four-pole switch 30mA
- 1 Module Three-pole thermal magnetic circuit-breaker, motor support
- 1 Module Four-pole isolating switch
- 1 Module Transformer 230V/24VAC-50Hz 120VA
- 1 Module Four pushbuttons
- 1 Module 10 indicator lights 24VAC-50Hz
- 1 Module Reversing contactor 24VAC-50Hz with 2NO+2NC
- 2 Modules Contactors 24VAC-50Hz with 2NO+2NC
- 1 Module Timed contactor 24VAC-50Hz
- 1 Module Thermal relay
- 2 Modules Analogue voltmeter (400V) and ammeter (10A) displays.
- 2 Modules Digital wattmeter displays.
- 1 Module Speed controller 1.5kW power supply and 3-phase 400V output.
- 1 set of safety leads for carrying out the different practical works.
OPTIONAL: MOTO-VENTILATOR:
QUICK-C can be completed with a moto-ventilator.
- moto-ventilator of three-phase voltage 400/690V - 300W.
- Nominal speed 1500rot/min.
- ref. KT-1M
Properties
- QUICK-C/ELE