- SOL-ARTIS2 is ONLY compatible with the PV solar panels SOL-200 (Langlois).
- SOL-ARTIS2 is supplied with 1x PV solar panel SOL-200.
- For most of the indoor applications/systems, 2x SOL-ARTIS2 is equired.
- Supplied with 1x PV solar panel SOL-200 (Langlois).
- Two opaque side panels prevent accidental contact with the lamps and the accidental blinding of a user.
- Forced ventilation from bottom to top.
This source for getting around the loss of sunlight by illuminating the solar panel with artificial light whose spectrum is close to sunlight. While not having as much luminosity as unclouded sunlight, it illuminates with sufficient intensity for the panel to generate 1/3 of its peak power Wc (corresponding to sunlight at 1kW/m²).
The solar panel can be removed easily in order to replace a spotlight quickly if necessary.
The unit located on the back of the spotlights panel includes
- a key-operated emergency stop button for cutting the electricity supply to the spotlights
- a digital thermometer shows the temperature at the surface of the solar panel; Accuracy 1°C.
- a potentiometer for lighting adjustment, by dimmer built into the unit
- a flow control for the forced ventilation
- automatic power supply cut-off to the spotlights in the event of abnormal temperature rise of the solar panel.
- Sealed connections IP65 – 1000V
- Power supply: 230VAC.
- Dimensions/Weight: 1228 x 665mm height 1926mm.
- 4 casters including 2 with brake
ELECTRICAL FEATURES OF THE SOLAR PANEL AT 25°C:
LIGHTING SOLAR ARTIFICIAL
Maximum power 220Wc 70Wc
Open circuit voltage 43V 43V
Short-circuit current 6.2A 2.3A
PRACTICAL WORK
Adjustment of the light intensity demonstrates the correlation between the light flow and the current delivered by the photovoltaic panel, at constant voltage.
A temperature probe linked to the unit thermometer is located on the solar panel. This shows its instantaneous temperature. Any reduction of the ventilation flow causes the panel temperature to rise, and lowers the photovoltaic current in constant lighting.
Special characteristics for SOL-ARTI2 et SOL-ARTI2-N:
Two opaque side panels prevent the accidental blinding of a student. With the solar panel and spotlight support they also make a closed duct for evacuating heat by an air current going from bottom to top. Centrifugal fans, located in the bottom part, inject fresh air that runs up the panel.
Grids in the bottom and top parts let the air flow pass evacuating the heat, and prevent accidental contact by hand with a burning spotlight or with the fan blades.
The versions SOL-ECO2 and SOL-ECO2-N have NO lateral protection, no forced ventilation. Versions delivered with 4 poles and 2 chains for the delimitation of a safety zone around the system.
- SOL-ARTIS2 is supplied with 1x PV solar panel SOL-200.
- For most of the indoor applications/systems, 2x SOL-ARTIS2 is equired.
- Supplied with 1x PV solar panel SOL-200 (Langlois).
- Two opaque side panels prevent accidental contact with the lamps and the accidental blinding of a user.
- Forced ventilation from bottom to top.
This source for getting around the loss of sunlight by illuminating the solar panel with artificial light whose spectrum is close to sunlight. While not having as much luminosity as unclouded sunlight, it illuminates with sufficient intensity for the panel to generate 1/3 of its peak power Wc (corresponding to sunlight at 1kW/m²).
The solar panel can be removed easily in order to replace a spotlight quickly if necessary.
The unit located on the back of the spotlights panel includes
- a key-operated emergency stop button for cutting the electricity supply to the spotlights
- a digital thermometer shows the temperature at the surface of the solar panel; Accuracy 1°C.
- a potentiometer for lighting adjustment, by dimmer built into the unit
- a flow control for the forced ventilation
- automatic power supply cut-off to the spotlights in the event of abnormal temperature rise of the solar panel.
- Sealed connections IP65 – 1000V
- Power supply: 230VAC.
- Dimensions/Weight: 1228 x 665mm height 1926mm.
- 4 casters including 2 with brake
ELECTRICAL FEATURES OF THE SOLAR PANEL AT 25°C:
LIGHTING SOLAR ARTIFICIAL
Maximum power 220Wc 70Wc
Open circuit voltage 43V 43V
Short-circuit current 6.2A 2.3A
PRACTICAL WORK
Adjustment of the light intensity demonstrates the correlation between the light flow and the current delivered by the photovoltaic panel, at constant voltage.
A temperature probe linked to the unit thermometer is located on the solar panel. This shows its instantaneous temperature. Any reduction of the ventilation flow causes the panel temperature to rise, and lowers the photovoltaic current in constant lighting.
Special characteristics for SOL-ARTI2 et SOL-ARTI2-N:
Two opaque side panels prevent the accidental blinding of a student. With the solar panel and spotlight support they also make a closed duct for evacuating heat by an air current going from bottom to top. Centrifugal fans, located in the bottom part, inject fresh air that runs up the panel.
Grids in the bottom and top parts let the air flow pass evacuating the heat, and prevent accidental contact by hand with a burning spotlight or with the fan blades.
The versions SOL-ECO2 and SOL-ECO2-N have NO lateral protection, no forced ventilation. Versions delivered with 4 poles and 2 chains for the delimitation of a safety zone around the system.
Properties
- SOL-ARTI2/ELE