This newly developed energy cost meter can receive the electrical power of up to four transmitters. The device is counting the consumption continuously and through this weekly, monthly and annual consumption. So electrical loads can be monitored over a long period of time and energy intensive equipment will be identified.
The wireless 2.4 GHz receiver technology allows a wide range between transmitter and receiver from up to 100 meters, so that the user can install the receiver unit in the workplace, from where it can monitor and also switch the inputs by pressing a button. Additionally it allows the programming of automatic on and off switching states depending on the day and time.
The large 8cm LCD multi-line display simultaneously shows the on-, or off state, the current consumption, energy costs and the current time and date.
Optionally, the display can be switched by pressing a button to show the cost of electricity per hour, the voltage and current ratings or the CO ² emissions for energy consumers.
Present-, Weekly-, Monthly-, Annual- consumption counter
Wireless receiver with up to 100m range
Large 8 cm multi-line display
Four measurement channels on the receiver unit
Channels switchable by receiver
Day and Night tariff adjustable
Time switching function for all four channels
CO2 emission calculation in CO2/kg
Receiver freestanding or wall mountable
Safety: GS, EN 61010-1, CAT II 300 V
Accessories: 1 x Transmitter, 1 x Receiver, Batteries, User manual
Additional accessories: transmitter P 9040 TR
Nominal input voltage transmitter 230 V AC, 60 Hz
Voltage measurement 100 - 250.0 V AC
Current measurement 0.01 … 16 A
Max. load 16 A, 3680 W
Watt Display 0.0 ... 3680.0 W
Power factor calculation Automatic
Consumption display 0.0 ... 9999.9 kWh
Accuracy active power +/- 2 %
Signal frequency 2.4 GHz
Sample rate 6 ~ 30 sec. typically
Operating Voltage 2 x 1.5 V AA (Receiver) ; 230 V, 60 Hz (Transmitter)
Dimensions (W x H x D) 124 x 91 x 26 (Receiver) ; 121 x 62 x 72 mm (Transmitter)
Weight 2 x 150 g
EAN-13 4250569402630
The wireless 2.4 GHz receiver technology allows a wide range between transmitter and receiver from up to 100 meters, so that the user can install the receiver unit in the workplace, from where it can monitor and also switch the inputs by pressing a button. Additionally it allows the programming of automatic on and off switching states depending on the day and time.
The large 8cm LCD multi-line display simultaneously shows the on-, or off state, the current consumption, energy costs and the current time and date.
Optionally, the display can be switched by pressing a button to show the cost of electricity per hour, the voltage and current ratings or the CO ² emissions for energy consumers.
Present-, Weekly-, Monthly-, Annual- consumption counter
Wireless receiver with up to 100m range
Large 8 cm multi-line display
Four measurement channels on the receiver unit
Channels switchable by receiver
Day and Night tariff adjustable
Time switching function for all four channels
CO2 emission calculation in CO2/kg
Receiver freestanding or wall mountable
Safety: GS, EN 61010-1, CAT II 300 V
Accessories: 1 x Transmitter, 1 x Receiver, Batteries, User manual
Additional accessories: transmitter P 9040 TR
Nominal input voltage transmitter 230 V AC, 60 Hz
Voltage measurement 100 - 250.0 V AC
Current measurement 0.01 … 16 A
Max. load 16 A, 3680 W
Watt Display 0.0 ... 3680.0 W
Power factor calculation Automatic
Consumption display 0.0 ... 9999.9 kWh
Accuracy active power +/- 2 %
Signal frequency 2.4 GHz
Sample rate 6 ~ 30 sec. typically
Operating Voltage 2 x 1.5 V AA (Receiver) ; 230 V, 60 Hz (Transmitter)
Dimensions (W x H x D) 124 x 91 x 26 (Receiver) ; 121 x 62 x 72 mm (Transmitter)
Weight 2 x 150 g
EAN-13 4250569402630
Caractéristiques
- 114030