100 W switching mode power supply with current limiting control, is designed with the objectives of high accuracy, compactness and easy portability. The large and illuminated LCD display provides clear and sharp readings even under dim light. Output over voltage protection ensures a better and tighter protection to voltage sensitive loads. Excellent line and load regulations, high efficiency, low ripple & noise that are typical of advanced switching mode power supplies.
Illuminated LCD indications of A, V, output ON-OFF, CC & CV
4 digit, 13 mm displays of Volt and Amp meters
Voltage and current controls
Output over voltage protection, short circuit, overload and over temperature protections
Safety: EN-61010-1, EMC: EN-55011
Accessories: power cable, test lead and manual
Output voltage adjustable range 1.0 - 20 V
Output current adjustable range 0 - 5 A
Load from 10 % to 100 % variation 70 mV
Line from 180 to 264 V AC variation 20 mV
Ripple & noise in r.m.s. 5 mV
Ripple & noise (peak to peak) 30 mV
Load from 10 % to 100 % variation 20 mA
Line from 180 to 264 V AC variation 20 mA
Ripple & noise (peak to peak) 20 mA
Switching operation frequency 80 - 120 kHz
Power factor 0,68
Efficiency at maximum power 84 %
Voltmeter accuracy ± 1,0 % + 3 dgt.
Ampermeter accuracy ± 1,0 % + 3 dgt.
LCD-display CC, CV, A, V, output ON-OFF
Operation voltage 200 ~ 240 V AC; 50/60 Hz
Dimensions (WxHxD) 70 x 150 x 250 mm
Weight 2 kg
Illuminated LCD indications of A, V, output ON-OFF, CC & CV
4 digit, 13 mm displays of Volt and Amp meters
Voltage and current controls
Output over voltage protection, short circuit, overload and over temperature protections
Safety: EN-61010-1, EMC: EN-55011
Accessories: power cable, test lead and manual
Output voltage adjustable range 1.0 - 20 V
Output current adjustable range 0 - 5 A
Load from 10 % to 100 % variation 70 mV
Line from 180 to 264 V AC variation 20 mV
Ripple & noise in r.m.s. 5 mV
Ripple & noise (peak to peak) 30 mV
Load from 10 % to 100 % variation 20 mA
Line from 180 to 264 V AC variation 20 mA
Ripple & noise (peak to peak) 20 mA
Switching operation frequency 80 - 120 kHz
Power factor 0,68
Efficiency at maximum power 84 %
Voltmeter accuracy ± 1,0 % + 3 dgt.
Ampermeter accuracy ± 1,0 % + 3 dgt.
LCD-display CC, CV, A, V, output ON-OFF
Operation voltage 200 ~ 240 V AC; 50/60 Hz
Dimensions (WxHxD) 70 x 150 x 250 mm
Weight 2 kg
Properties
- 114603
- 6095