Meant for connection to a PC with USB ports, this two-channel USB oscilloscope comes with a USB cable as well as Windows software. On being connected to a PC, the digital storage oscilloscope not only offers a wide spectrum of features but also the added advantage of being able to save measured data and process them further, for example, for purposes ranging as far as FFT analysis. The monitor’s surface is modelled after that of a conventional oscilloscope. Operation is facilitated by an auto-set function
for automatic adaptation to measuring signals and numerous trigger functions.
Technical data:
Channels: Two
Operating modes: CH1, CH2, X/Y
Sampling rate: 150 MS/s
Input coupling: DC, AC, GND
Input impedance 1 MΩ ll 50 pF
Input voltage: 0 – 35 V
Deflection coefficient: 10 mV/div. – 5 V/div.
Accuracy: ± 3 %
A/D converter: 8-bit resolution
Bandwidth: 50 MHz
Time coefficient: 4 ns/div. – 1 h/div.
Roll mode: 1 s/div. – 1 h/div.
Trigger: Auto/Normal/Single/Ext.
Calibrator: 1 kHz/ 2 Vpp
Memory depth: 10 - 64 kpts
Interface: USB 2.0
Voltage supply: Via two USB ports
Dimensions: 205x38x125 mm³
Weight: 430 g
Windows: 98SE / ME / 2000 / XP / VistaTM / Windows® 7
Analysis options: LabVIEW® compatible,
data transfer to spreadsheet programs
for automatic adaptation to measuring signals and numerous trigger functions.
Technical data:
Channels: Two
Operating modes: CH1, CH2, X/Y
Sampling rate: 150 MS/s
Input coupling: DC, AC, GND
Input impedance 1 MΩ ll 50 pF
Input voltage: 0 – 35 V
Deflection coefficient: 10 mV/div. – 5 V/div.
Accuracy: ± 3 %
A/D converter: 8-bit resolution
Bandwidth: 50 MHz
Time coefficient: 4 ns/div. – 1 h/div.
Roll mode: 1 s/div. – 1 h/div.
Trigger: Auto/Normal/Single/Ext.
Calibrator: 1 kHz/ 2 Vpp
Memory depth: 10 - 64 kpts
Interface: USB 2.0
Voltage supply: Via two USB ports
Dimensions: 205x38x125 mm³
Weight: 430 g
Windows: 98SE / ME / 2000 / XP / VistaTM / Windows® 7
Analysis options: LabVIEW® compatible,
data transfer to spreadsheet programs
Eigenschappen
- 1017264/3B